Single cell machines are used where light to medium volume is needed.

Operation

• Parts are loaded onto a fixture at the front of the machine.
• After parts are loaded operator will close a pneumatic door and start the blast cycle.
• There are multiable  nozzles blasting the part while the part is being rotated on the fixture.
• After the blast the part is then going thru a blow off process.
• Operator will then open door and remove finished part and load another new part on fixture to be processed.

Contact Us To Find Out More About Our Industrial Abrasive Blasting Cabinet Solutions

Suction system, single cell with pneumatic door, power turntable, reclaim and dust collector.