Features Of The Engineered Abrasives Dust Collector Include:

• The fine dust that is removed flows into a canister type dust collector.
• The collector is made in various sizes and options
• A standard size dust collector for a shot peening or cleaning machine is 48” wide x 60” deep x 132” high. (add 48” for blower)
• There are (6) canisters with 1500 square feet of filter area.
• Collector has a magnehelic gauge for quick, visual inspection of canisters.
• A reverse jet of air every 45 seconds cleans each bank of canisters.
• Canisters are easy replicable with just one bolt each.
• Collector is made of 3/16” welded steel  with easy empty dust hopper (1)
• Hopper will have a slide gate. Blower is mounted on clean air side.
• Collection system also has (2) water sprinkler heads and heat sensor that will shut down blower

Contact Us To Find Out More About Our Industrial Abrasive Blasting Dust Collector Solutions

Easy Change Filter Elements

A dust collector is used to remove fine dust from the operating mix and the blast chamber in a blasting machine during the blasting cycle.

The fine dust that is removed flows into a canister type dust collector.  The collector is made in various sizes and options.

A standard size dust collector for a shot peening or cleaning machine is 48” wide x 60” deep x 132” high. (Add 48” for blower).  There are (6) canisters with 1500 square feet of filter area.  Collector has a magnehelic gauge for quick, visual inspection of canisters.  A reverse jet of air every 45 seconds cleans each bank of canisters.  Canisters are easy replicable with just one bolt each.  Collector is made of 3/16” welded steel  with easy empty dust hopper (1).  Hopper will have a slide gate. Blower is mounted on clean air side.  Collection system also has (2) water sprinkler heads and heat sensor that will shut down blower.